Ergotron Dual Monitor & Handle Kit

SKU: ETRN-97-783

(0 Review) Be the first to Write a review

*Free freight restrictions to certain states, click here for details.

Dual Monitor Arm with Handle

More Views

  • Dual Monitor Arm with Handle
  • Dual Monitor Solutions
  • Dual Monitor Arm with Handle Back
  • Dual Monitor Arm with Handle Kit


Use the Ergotron Dual Monitor and Handle Kit to convert a single monitor mount to a dual monitor mount. It can also be used to increase the size of compatible displays for your current dual monitor array. Included is a handle that makes repositioning the screens quick and easy.

Benefits and Features:

  • Perfect dual-mounting solution for monitors with screen sizes of 17" to 24"
  • Attaches to wide variety of mounts using a 50 x 50 mm or 100 x 100 mm hole pattern
  • Robust design ensures many years of service
  • Conceal and organize cables: Display cables can be neatly routed behind displays

Additional Information

SKU ETRN-97-783
  • Screen: 17"–26"
  • Capacity: ≤ 36 lbs
  • Attaches to mounts with four-hole interface of 50 x 50 mm or 100 x 100 mm
  • Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
  • This kit can be installed and used without the included handle
  • Product Dimensions: 4"H x 29.1"W x 1.5"D (10 x 74 x 38 cm)
  • Includes: Bow, Two Mounting Brackets, Handle and Mounting Hardware
  • Outside width of monitor should be 14" to 24.5" (35 to 62 cm). This range accommodates most 17" to 24" displays as well as some displays as large as 26". If the outside width is less than 14" (35 cm), a small gap will be present between the two displays. Displays with an outside width greater than 24.5" (62 cm) are not compatible
  • Combined weight of displays can be no more than 36 lbs (16.4 kg). This kit adds an additional 6 lbs (2.7 kg) to your mounting solution. Your mounting solution’s weight capacity must be reduced by 6 lbs (2.7 kg) when using standard monitors less than or equal to 2.5" (64 mm) thick. Additional reduction may be required if monitors are greater than 2.5" (64 mm) thick. Exception: When used as a replacement bow on WorkFit Dual products, there is no reduction in capacity